I received one of the Injen hard pipe kits for the TT today for one of my over seas customers before shipping it out I wanted to make sure that everything was in good condition and all parts are accounted for. Well I am taking a few pictures to try and rule out some rumors I have heard about this kit in the past like the pipes are too short. The pipes are an acceptable length, you can see I laid them out next to the stock hoses and also I had an old inter cooler pipe with a blitz blow off valve attached. If any of you has had any experience with this blitz blow off valve kit you know that there in not much room to work with when installing them. The Injen pipes are just a tad bit shorter and look like they will drop in with little difficulty and the silicon couplings will bridge the reaming gap. Now the funky shaped translation pipe that connects to the inter cooler to the throttle bodies has a bright red Injen badge on it that can be removed with little effort. These pipes are also very thick and are cast. They look very forgiving if you want to mount your blow off valves close to your throttle bodies. Over all the kit looks to be good quality, all the pipes are nicely polished and look easy to maintain. You can flip the silicone couplings upside down if you don't want to look at the Injen logo. Then only I thing that I think Injen might have did just a little better is clean up the flashing dimples on the inside of the throttle body pipe. Over all it looks to be a solid kit if anybody is interested I will list in the Classifieds
The flashing I mentioned This was just wiped out with a rag
Follow Ups
Small write up on the Injen hard pipe kit and pics - Tony@GZperformance20:32:11 10/24/05
Small write up on the Injen hard pipe kit and pics - 
