Subject	actually, you only need 2 harnesses (each has 3 connectors).
Posted by	Bernie on August 16, 2000 at 9:52 PM
	This message has been viewed 60 times.
In Reply To	Here you go-> posted by munkey on August 16, 2000 at 08:15 PM
Message	also, you don't need to solder the connectors on, using 18 and 20 gauge crimp connectors is all you need. (and actually better for the wiring too... soldering makes the wire brittle). see [ www.ttaz.org ] in the tech section under "injector replacement" for the proper part numbers for the harnesses. be sure to clean the contacts on the injectors with contact cleaner too. : You can get a harness kit for another Nissan car which contains two of the injector connectors for about $30 as I recall. So you need 3, $90 versus the $3xx for the harness. Ask your dealer or do a search for specific info; this question has been answered before. One drawback is that you have to solder the connectors on. Bernie The heart of the Phoenix... bhsiao@newssun.med.miami.edu
Follow Ups	Fuel Injector connectors corroded. - troyh 19:58:45 08/16/00 Here you go-> - munkey 20:15:05 08/16/00 actually, you only need 2 harnesses (each has 3 connectors). - Bernie 21:52:59 08/16/00
Post a Followup	You cannot reply to this message because you are not logged in.