Subject	race with removable crossbar and harness bar
Posted by	Guapo on October 12, 2005 at 8:15 PM
	This message has been viewed 314 times.
In Reply To	got an autopower roll bar??? which specific model do you >> posted by sawbonez (rebuild in progress) on October 12, 2005 at 08:09 PM
Message	Full driver's seat travel, but passenger seat travel is slightly limited with the crossbar in (which I take out for street use). [ http://www.ioportracing.com/Merchant2/merchant.mv?Screen=PROD&Product_Code=60171&Category_Code=AP171 ] Petz #2 "What's the point of having the car if you don't drive it?" - Mrs. Guapo 08/20/05 Jeeeesus Christ - my Dad (after a ride in my Z) 12/26/04
Follow Ups	got an autopower roll bar??? which specific model do you >> - sawbonez (rebuild in progress) 20:09:22 10/12/05 race with removable crossbar and harness bar - Guapo 20:15:33 10/12/05 I would put my t-tops on for track use. (n/m) - tyler@boostpro.net 20:19:49 10/12/05 Good luck fitting your helmet in there. (n/m) - Hiratsuka0689 (ATL) 20:25:14 10/12/05 fits during autoX use... (n/m) - tyler@boostpro.net 20:50:36 10/12/05 wtf..how since the helmet it roughly an inch higher than the - fst300zx 21:03:53 10/12/05 I've done it, and I'm 6'1" ... - Guapo 21:08:14 10/12/05 huh im 6ft and i had an issue witha snell 2000 motorcycle - fst300zx 21:10:31 10/12/05 i found if you lodge your helmeted head between the seat - dogpile 21:13:40 10/12/05 5' 10" actually... - tyler@boostpro.net 21:28:30 10/12/05 i use a motoX helmet... - tyler@boostpro.net 21:32:07 10/12/05 okay (n/m) - Guapo 20:26:17 10/12/05 And you would sit in the paddock and watch..? (n/m) - Maximamike 20:29:26 10/12/05 thanks! (n/m) - sawbonez (rebuild in progress) 20:23:02 10/12/05 do i need to get padding for the roll bar? (n/m) - sawbonez (rebuild in progress) 20:37:00 10/12/05 You should - trackstar 20:46:13 10/12/05 What size tubing did you get? (n/m) - mousersix (San Antonio) 22:07:54 10/12/05 2" (n/m) - Guapo 22:10:58 10/12/05 A sad legacy indeed. (n/m) - Kenny 12:03:13 10/13/05 Re: A sad legacy indeed. - Guapo 12:07:58 10/13/05 2nd (n/m) - mousersix (San Antonio) 12:33:40 10/13/05 Ahhhh hah hah hah.... Sorry, I just burst out laughing... - aggiez32 12:09:44 10/13/05 I've been looking into a race roll bar.. - WickedZX (NoVA) 22:18:44 10/12/05 It is, but you'll have to factor in shipping as well (n/m) - Guapo 22:22:50 10/12/05 Right, seeing as I'm on the East coast.. - WickedZX (NoVA) 22:36:03 10/12/05 did you put it in yourself? - maxboost83(WA) 00:09:19 10/13/05 Questions on harness bar - Technomancer 10:20:36 10/13/05 The harness bar is actually the lower horizontal bar - Guapo 11:04:30 10/13/05 Gotcha! Muchos gracias... (n/m) - Technomancer 12:24:40 10/13/05 Milo!@?? where ya at? - Shawn300zTT GT28R MD 23:07:41 10/12/05
Post a Followup	You cannot reply to this message because you are not logged in.