Went to the dyno last night for curousity of what the car is doing hp wise. I wanted to get a baseline in an untuned state at 16lbs of boost . First run I got 494hp 422ftlbs. Running way rich according to my Greddy A/F guage. Leaned out out 2% on the afc got about 493 and 420 ftlbs. It was warm in the shop 89 dregrees. Just had two little fans blowing on the intercoolers. Lean it out another 2% got 514 hp and 422 ft. lbs. Still running rich about 10:1 ratio according to my guage. I had pump gas and a bottle of octane boost. The torque was a lot lower than expected. The torque stays flat at 420ft.lbs from 4500 rpm to 6500 rpm with no drop off. We only took it to 6500 rpm. On the stock motor and turbos the torque peaks at 4800rpm and then does a nose dive towards redline. Saturday we are doing the actual tuning with the wide band 02 and turning up the boost from 16lbs.
Mike
Follow Ups
My baseline dyno runs yesterday - MikeH(Phoenix)09:49:26 03/28/01
