| cartridge. The problem is that the GT28RS uses a 62-trim comrpessor wheel and the GT2530 uses a 63-trim compressor wheel. HE will be able to physically put the GT2530 housing onto the GT28RS cartridge, but it will be a mismatch - the inducer bore of the GT2530 housing is larger than it should be for a 62-trim wheel. The GT2530 housing needs to be matches with a 63-trim comrpessor wheel. The pair of GT2530 turbos that he has already have the 63-trim comrpessor on them. That compressor will fit right onto the quill of the shaft on the GT28RS. All he needs to do is swap the compressor wheel from the GT2530 cartridge onto the GT28RS cartridge and then put the GT2530 compressor housing onto the cartridge. The 63-trim compressor wheel wont physically fit into the GT28RS compressor housing because the wheel's inducer is too large.
[ ashspecz.com ]
[ agpowers@bellsouth.net ] Enthusiasts soon understand each other. --W. Irving.
Are you an enthusiast? If you are out to describe the truth, leave elegance to the tailor.
Albert Einstein
|
