Subject	per Greg Dupree:
Posted by	aliaZ on June 21, 2005 at 3:17 PM
	This message has been viewed 316 times.
In Reply To	Q to all the members with upgraded turbos and no BOVs posted by PLEAZURE in CA (SD) on June 21, 2005 at 01:27 PM
Message	From an email from Greg about this subject: The stock recirc's are very strong. We have run them at 30 psi without a problem. I have tested the stock recirc's off the car with 50psi pressure on them and they do not leak at all. Blow off valves are very hard on the engine because they cause the ECU to open the injectors and pour in raw fuel every time you hear the Psssst sound. Every Z that I have seen with blow offs installs very long has oil burning issues and has raw gas in the crankcase. When ever you change oil on a Z with blow off valves the oil smells like gas.
Follow Ups	Q to all the members with upgraded turbos and no BOVs - PLEAZURE in CA (SD) 13:27:24 06/21/05 I would feel perfectly safe using stock recircs w/ my JWT500 - ZEngineer 13:37:17 06/21/05 What do your feelings have to do with recirc performance? - Kenny 13:41:51 06/21/05 do you think stock recircs would cause compressor surge - ZEngineer 13:50:51 06/21/05 Yes, that is my concern. (n/m) - Kenny 13:57:21 06/21/05 it's a valid one - ZEngineer 14:04:22 06/21/05 I'd prefer to err on the side of safety. - Kenny 14:13:42 06/21/05 Exactly every post I saw in regard to that issue is based on - PLEAZURE in CA (SD) 16:32:05 06/21/05 I don't (n/m) - aliaZ 16:37:27 06/21/05 hks 2530's. re-circs. No issues. - spotz 13:40:05 06/21/05 I admire your self-control =) (n/m) - ZEngineer 13:51:39 06/21/05 Don't....It cost too much. - spotz 15:20:51 06/21/05 I think people are mainly interested in HIGHER levels of - Z-Jay (Edmonton, AB) 14:13:02 06/21/05 Even if they don't leak, they may not vent... - Kenny 14:18:03 06/21/05 12psi on HKS is getting close to 400RWHP. - spotz 15:22:12 06/21/05 thats nuts that you can hold urself back :) - shawn300zTT GT28R soon 15:20:08 06/21/05 A BOV designed to vent a higher volume of air... - Kenny 13:43:46 06/21/05 Why not toss in a couple more stockers... - Rob'Z 14:04:05 06/21/05 I've seen SR engines using two BlitZ BOVs in series - ZEngineer 14:05:44 06/21/05 I'm sure that would work if you could figure out all the... - Kenny 16:32:34 06/21/05 Re: A BOV designed to vent a higher volume of air... - Rule12b 14:08:48 06/21/05 In my second sentence I referenced recirculating HKS SSQVs. - Kenny 14:16:38 06/21/05 Greg Dupree seems to do okay with recircs ... (n/m) - Guapo 14:03:50 06/21/05 stock or aftermarket recircs? (n/m) - ZEngineer 14:13:15 06/21/05 afaik, stock (n/m) - Guapo 14:18:48 06/21/05 yep (n/m) - aliaZ 15:12:53 06/21/05 per Greg Dupree: - aliaZ 15:17:15 06/21/05 Sounds like a good argument for using recirc adapters... - Kenny 15:42:10 06/21/05 2nd (n/m) - Zeus 15:56:34 06/21/05 It'd be great to have this posted in tech for AFAQ... - Dave N 15:44:07 06/21/05 This does not address the issue of volume. - Kenny 15:52:57 06/21/05 Furthermore, I don't know why... - Kenny 15:56:55 06/21/05 You're right, but I had the "I want to put BOV's on my - Dave N 15:59:10 06/21/05 I tend to assume that crowd is too moronic to even read. - Kenny 16:02:29 06/21/05 +2 (n/m) - Dave N 16:09:20 06/21/05 *ding* (n/m) - Scotts94z32 16:14:37 06/21/05 I've disassembled the HKS units - aliaZ 16:35:08 06/21/05 not to barge in - dogpile 19:01:55 06/21/05 oh I agree completely - aliaZ 19:22:29 06/21/05 well good. im not saying to go either way, but to me - dogpile 19:33:32 06/21/05 What does the map sensor tell you ? - PLEAZURE in CA (SD) 15:47:01 06/22/05 different car - dogpile 16:43:26 06/22/05 You are not noticing any additional lag between shifts? - maglito 10:36:19 06/22/05 not really - aliaZ 18:10:27 06/22/05 How does compressor surge sound ? - PLEAZURE in CA (SD) 15:43:54 06/22/05 Re: How does compressor surge sound ? - aliaZ 18:09:36 06/22/05 Bookmarked. (n/m) - Zfreak (Dallas) 21:46:47 06/21/05 Weird, my oil has never smelt like gas... (n/m) - Russ ZTT (Jax, Fl) 09:00:45 06/22/05
Post a Followup	You cannot reply to this message because you are not logged in.