TwinTurbo.NET: Nissan 300ZX forum - Here's your options...
People Seeking Info
 
   


     
Subject Here's your options...
     
Posted by BooZTT (Hawaii) on May 24, 2005 at 7:46 PM
  This message has been viewed 87 times.
     
In Reply To offset posted by cjm300zxtt on May 24, 2005 at 06:52 PM
     
Message Well, all of the offsets will clear the brakes..no real issue there. Most will tell you to go +38 all around and there's a slighht chance you'd need a spacer in front..but from the wheel shape I doubt it...blah. That's what I was reffering to as the "safe" offset. I'd say go +32 on the fronts..but that's me, it'll put the wheel flush with the fender, but you'd need to roll the fenders and also run a slightly stretched tire..not as stretched as mine..just a little..I'd suggest using the ST115 from Falken as the sidewall angles in..which will help for clearance. You could get away with a 235 and it will hardly be stretched but still clear..remember when the car dips the camber goes in (negative) and gives even more clearance. In the back with this style wheel looks like a +30 will sit just even with the fender well but with a little negative camber and slightly stretched tire will fit fine..just roll the fender to be safe. If anyone tells you these are BS..look at my car..my wheels fit and they are more extreme offset than what I've given you (I have AP brakes in front which allows for lower offset in a dish style wheel). Most of the people that say these things:

a. do not have rolled fenders
b. want the wheels tucked inside the fender
c. think strething tires is the end of the world.

It's up to you in the end..but good offset wheels always look hot on any car. Remember these wheels are a face design wheel..meaning there is no "lip" the face is always on the outter edge and on the CR the spokes thin out on the inside towards the edge.


Memorable quotes:
Seedy, I think I saw you pulling out of Jack on Colorado.
Posted by: DragonReborn214

I like your rear...
Posted by:Lady300Z(Bmore,MD)
to: Me!

-->STEAMYZ<-- WHen you bringin out your knob??
Posted by: Bobby12many

Look at what I'm taking off....>>>> - sexZgirl
posted by: herself!

What size are they .....and when we doing our action photos?
posted by: Z1TRUTH

you got a thick one. almost as thick as mine, whats the thickness of yours? 4"?
Posted by: joel(PA)
to: George(boostsolutionsinc.net)

It's funny because I've had it both ways...
Posted by: SeedyROM

Your knob is crooked and naked (n/m)
Posted by: Spee

These nuts are so hard to get off................
Posted by: littlevinny15

There's nothing like the feeling of being rear-ended...
Posted by: AshsZ

WTF!!! I am leaking in strange places...please help ...
Posted by: Jodecy

The last thing I want is for my car to be driving down the road, and everyone is asking "did his car just queef?"
Posted by: BOOZTD 3

the color of your plug seems different than others...
Posted by: Zluster(Project Platypus)

     
Follow Ups  
     
Post a
Followup

You cannot reply to this message because you are not logged in.