Subject	Look on my website:www.leadergears.com It lists the
Posted by	SirpriZ on May 12, 2005 at 5:30 PM
	This message has been viewed 354 times.
In Reply To	diff rebuild kit? posted by scottsi on May 12, 2005 at 02:20 PM
Message	bearings you'll need to do a complete rebuild. The inner pinion bearing listed as obsolete can be substituted with Part # 38120-7S000. It will show up as a rear pinion bearing for an Armada, but it is the same (with the exception of a slight champher on the race, which doesn't make any difference). I don't have the part #s for the axle bearings, but those should be easy to find by asking for "axle bearings" (haha). In most of the units I have had set up, the diff. shop has used the stock pinion shim, and it sets up a good tooth pattern. Give me a holler when it's time to either just do a straight rebuild or install the gears and I'll give you all the specs necessary, and how to utilize existing shims, if they need to be modified. Also, make sure you take it to someone that specializes in differential assemblies. Not only are they tricky to set up and rebuild, but for some reason, Nissans' seem especially finicky. Good luck, Mark
Follow Ups	diff rebuild kit? - scottsi 14:20:25 05/12/05 Ni[x]iT should have the parts list... - RedShiftZ (KCMo) 14:36:11 05/12/05 Re: Ni[x]iT should have the parts list... - scottsi 15:56:31 05/12/05 you sure its not the drive shaft support bearing? (n/m) - spyhunter(nj) 15:40:50 05/12/05 Look on my website:www.leadergears.com It lists the - SirpriZ 17:30:09 05/12/05
Post a Followup	You cannot reply to this message because you are not logged in.