Subject	Wetsanding w/ 800 or 1200 grit, depending on clear
Posted by	jkperformance on March 27, 2005 at 8:01 PM
	This message has been viewed 40 times.
In Reply To	Thanks to you both for the great info on "tiger stripes" posted by SirpriZ on March 27, 2005 at 11:59 AM
Message	aplicating methods, and smoothness of final product, but depending on where the areas are, the whole panel is going to have to be cleared, as it's not easy to blend clearcoat together, and not recommended (it never comes out well, and takes another additive). What you may try is taking a good rubbing compound, and a fullsize 7" buffer, NOT to exceed 3k rpms, and try it for a bit first, and follow with a polishing compound. We've done some miraculous things w/ them at work. Best of luck, John
Follow Ups	Rock chip review post - 300NASeattle 00:44:21 03/27/05 Can't add anything here, but your post is an informative - 240Z FeO2 05:01:42 03/27/05 Having quite a few hood chips myself, - kkrofft 07:39:08 03/27/05 If you apply a slight spray of an over-reduced clear, you - jkperformance 10:47:16 03/27/05 Thanks to you both for the great info on "tiger stripes" - SirpriZ 11:59:28 03/27/05 Wetsanding w/ 800 or 1200 grit, depending on clear - jkperformance 20:01:45 03/27/05 Thanks John. What do you recommend (brand and/or) - SirpriZ 20:40:35 03/27/05 Don't know about the chips but Zaino rocks !!! Click on - ConVerTT 08:04:33 03/27/05
Post a Followup	You cannot reply to this message because you are not logged in.