| mine was off about 1/2 -3/4 inch, over time things flex. i also had a different problem.. i ended up putting the rear sleeves on the front and the fronts on the rear. the springs where right. first make sure the sleeves are even with the top of the shock base. 2nd look over the part numbers and make sure you have them matching front and rear. it's 3rd that the mounts are set up the same. if i remember there are about 3 parts that make up the front mounts. if they forgot something it will be all off. all else fails, take the pass side down 1/2 and raise the driver side 1/2. make sure you are on FLAT level ground and measue from the ground to the wheel well. and look over for slightly damaged parts, but odds are if it is.... it's so minimal, it's not going to be seen with the eye. more with measureing tools. sorry. i loved mine.
________________________________________________________
RIC, my spelling sux, deal with it. 
90 stage stock Sold
93 max hp 207.4 max torque 188.7 *****DEAD*****
93 240sx coup 7 PSI woot!
01 stage 1
|
