| I've started back trying to figure out why my front drivers side sits lower than my pass side. The adjustment ring (orange) is set to the exact same height (16 threads from the bottom) on both sides, but yet my pass side is about an inch heigher than the drivers side. I adjusted the rings on both sides last night, took the drivers side UP 3 threads and the passenger side DOWN 2 threads. It seemed to make a small difference but it's still not close to being perfect. I'm just worried that I'm going to have problems since they will be adjusted differently on each side. Does it matter? I've had the coilover kit installed for at least 3 years, it's been sitting in the garage for about a year now. It has never sat just right, I've always had problems with it. 
Mike Butler
1991 300ZXTT Automatic - SGP Stage VI+ ICQ# 32155440 - Work
 |
Ground Control coilover adjustments... - 
