| My Z1 Howe didn’t fit due to the lower outlet tube being to long. My Z1 radiator required fabricating the lower outlet tube so it would fit. I had a local shop weld a 90 degree elbow on the lower outlet tube to eliminate this issue. My fan shroud fit fine but required a few zip ties along the bottom to secure it if I recall correctly. My Z’s water temp actually increased with the Howe. Using my previous stock radiator, my water temp was stable at 170-177. With the Howe, my normal temps stay at 177. If you are running any hotter than 180, you most likely need to burp the coolant system and add additional water and/or verify your clutch fan is good. The stock brackets won’t work, I would recommend purchasing the bracket from Coz..
Good luck,
Gary
  |
