East Coast Z32 Association

Subject	Consistancy is a good thing. Arnel and myself have the MPH
Posted by	GerryZ300 on March 09, 2001 at 2:33 PM
	This message has been viewed 24 times.
In Reply To	What The F#ck is wrong with my Z????????? posted by shawn300z {soon to have TT) on March 09, 2001 at 10:02 AM
Message	record from an N/A on this forum at 95MPH . Although he had a few more mods, I have a 5-speed. Since you have an auto, those times make sense to me. I've noticed that the average differance between an Auto and a 5-speed with the same mods are about 1/2 a second. Get those 60' times down to around 2.2 and you'll be closer to a 15.0. : OK! here is my times from Cecil County Dragway. I was looking at other NA times that were also 2+2's and Auto, and i don't understand why my Z is soo much slower, I have a Stage 2 (intake and exhaust)and i was looking at the other Z's times and they were like 14.8 and like 94 mph! WTF!!!!! my car runs fine, just a lil bumpy somtimes, but i fixed it, it has a new tranny, the engine has got 130k but it is fine, Just some days i'll drive it and it;ll feel ALOT weaker than days,(temp will be about the same,humidity also about the same) i don;t know why its like that. : 1st RUN : R/T..... .748 : 60'..... 2.422 : 330..... 6.673 : 1/8..... 10.129 : MPH..... 72.75 : 1000'... 13.105 : 1/4..... 15.623 : MPH..... 90.07 : 2nd RUN : R/T..... .616 : 60'..... 2.439 : 330..... 6.682 : 1.8..... 10.142 : MPH..... 72.63 : 1000'... 13.124 : 1/4..... 15.642 : MPH..... 89.65 : 3rd RUN : R/T..... .866 : 60'..... 2.442 : 330..... 6.667 : 1/8..... 10.106 : MPH..... 72.97 : 1000.... 13.069 : 1/4..... 15.572 : MPH..... 90.14 : 4th RUN : R/T..... .700 : 60'..... 2.421 : 330..... 6.621 : 1/8..... 10.050 : MPH..... 72.23 : 1000'... 13.017 : 1/4..... 15.526 <--------FASTEST 1/4 MILE RUN!!! : MPH..... 89.96 : Later,Shawn Gerryz 300ZX Page
Follow Ups	What The F#ck is wrong with my Z????????? - shawn300z {soon to have TT) 10:02:25 03/09/01 Re: My '87 Volvo Wagon ran 15.0@90pmh :-) (n/m) - Wolf [Pittsburgh] 10:23:41 03/09/01 i think someone must have slipped a honda DX motor in my Z! (n/m) - shawn300z {soon to have TT) 10:39:27 03/09/01 Bahahahahahahahahahah (n/m) - Logik (Pittsburgh) 10:41:56 03/09/01 Do a compression check on all your cylinders > - bb300z(No VA) 10:34:13 03/09/01 I've taken out almost everything, spare,floor mats, etc, all - shawn300z {soon to have TT) 10:38:26 03/09/01 the floor mats? rofl (n/m) - jasonzTT[atl] 12:06:07 03/09/01 I just read your profile,and I think the real problem is > - bb300z(No VA) 10:40:57 03/09/01 Dude, your 60ft is the problem >>> - SpdDemon13 (Baltimore) 10:52:03 03/09/01 i put my tires, at 25 PSI and i get a little wheel spin - shawn300z {soon to have TT) 12:06:19 03/09/01 take out back seat? there are also extra bose amps - dogpile 12:18:55 03/09/01 Re: take out back seat? there are also extra bose amps - Where Is Rice? 12:32:56 03/09/01 i didnt mean the enclosures under the rear panels - dogpile 12:58:31 03/09/01 *Definately*. I usually pull 2.1's. You've got a 15.0 in it - SeedyRom 12:12:24 03/09/01 seems normal to me - Where Is Rice? 12:13:01 03/09/01 ouch! as an auto 2+2 non-turbo owner, that hurts :-( (n/m) - nadir 12:41:02 03/09/01 Dude, I don't think there's anything wrong motor-wise. >> - Arnel(njoynmyz.com) 12:25:30 03/09/01 Whew Thanks arnel, and Everyone else also, What should my - shawn300z {soon to have TT) 12:44:05 03/09/01 Arnel, I can't wait to check out your TT tomorrow. (n/m) - GerryZ300 14:36:24 03/09/01 My ECU didn't come in today. I'll only be @ stage II+. :-( (n/m) - Arnel(njoynmyz.com) 16:02:29 03/09/01 Consistancy is a good thing. Arnel and myself have the MPH - GerryZ300 14:33:02 03/09/01
Post a Followup	You cannot reply to this message because you are not logged in.