What fuel set-up posted by 300zxracing91 on February 15, 2005 at 05:03 PM
Message
pressure guage and tee somewhere into your fuel line (near the fuel filter works). Tape said guage to winshield. Slowly increase your boost on an open track, highway, or school zone. Best done with a passenger to read the guage. Your pressure should increase (about) 1 psi for each pound of boost. If the fuel pressure starts going down as your boost is going up, you have run out of pump capacity. Turn your boost up to whatever your maximum target is and make sure your fuel pressure is 43psi(base pressure w/o vacuum)+your boost. Hope that helps, Mark