Subject	Uh... I dont think any T28 is going to flow 850 HP.
Posted by	NVMYZTTe-1 on March 06, 2001 at 8:50 PM
	This message has been viewed 30 times.
In Reply To	1 month until 800+ hp & 3.2 Liters of pure fun:) posted by [===Hellcat===] on March 06, 2001 at 07:58 PM
Message	: High performance Race Block Prep: Ported & Honed: Water Jackets, Water pump area, Oil Passages High Vol. Oil Pump Heavy Duty Bearings ARP Main Girdle & Head Studs Idler Pulleys Epoxy Filled Block Overbore (3.2 Liters)& balancing : Custom DSP T-28's (850hp on Race Gas & 730 on Pump gas) : Custom ROSS Pistons : Custom Rings : ESP Racing Rod : Custom Racing CAMS (Redline moving to 8,000 or 8,500 : DSP Front mount Intercooler : DSP Custom Twin Intake(each intake will go in stock IC spot) : Port & Polished:(each done to match) Heads Lower Intake Exhaust Manifolds Trottle Bodies(RC 3mm) : RC 720cc Injectors W/ Custom Fuel Rail & assorted mods : Metal Head Gasket : Down Pipes : ACT 6 Puck Clutch (as mine will burn up in seconds) : WOW! Am I excited!!!!!!!!!
Follow Ups	1 month until 800+ hp & 3.2 Liters of pure fun:) - [===Hellcat===] 19:58:50 03/06/01 you must be contributing to the fall of the stock market.lol - vip 20:08:34 03/06/01 How bad is your wallet gonna hurt? (n/m) - 3 double-0 ZX 20:08:49 03/06/01 Lots but have been saving for 8 months (n/m) - [===Hellcat===] 20:12:49 03/06/01 Custom T-28s? That is quite abit for those turbos...>>> - safZ 20:33:30 03/06/01 That clutch will also burn up :) - PSI-RACING 20:43:23 03/06/01 Yes, only OS and HKS triple disc can hang w/ that power..... (n/m) - ZBlacktt 22:16:39 03/06/01 Uh... I dont think any T28 is going to flow 850 HP. - NVMYZTTe-1 20:50:08 03/06/01 Of course they will, DSP told him so - F8IZHIS 21:02:21 03/06/01 Now, I'm a big fan of T/28's, but come on, I have yet >> - ZBlacktt 22:14:52 03/06/01 it was 11 sec and 80 shot on STOCK turbos:) (n/m) - Rob (Miami) 22:18:31 03/06/01 Sh*T that's right, My bust, thanx.......sorry :) (n/m) - ZBlacktt 22:23:39 03/06/01 Speaking of T/28's, how's the car Rob? :) - ZBlacktt 22:28:26 03/06/01 Don't worry..Things are gonna get WILD again !! :) (n/m) - Gil(Miami) 22:49:58 03/06/01 Man, all of the Maimi guys are still alive!! :-) (n/m) - safZ 22:53:49 03/06/01 If you get this Gil, tell Gyro TO CALL ME!!!! hes not - Russ ZTT (Jax, Fl) 07:27:33 03/07/01 You are doing exactly what I am doing with my motor :-) - 96-2+2TT 20:53:03 03/06/01 ACT 6 puck..rated at 452 ftlbs torque...may wanna reconsider - wesman [92TT-less ] 21:04:26 03/06/01 Ditto that - good clutch, but not for 800hp... (n/m) - MIT-Z 21:53:35 03/06/01 Wes, you got the injectors yet? (n/m) - TRUST 22:20:49 03/06/01 yes...thanks a lot man :) (n/m) - wesman [92TT-less ] 23:40:21 03/06/01 Awesome!..need more clutch...don't hold breath on 1 month > - qqqqqqqman 21:09:45 03/06/01 Hmmm. Better start shoping for a dual or tripple disc clutch - Good2Zya 21:26:53 03/06/01 Also.. - Good2Zya 21:37:08 03/06/01 Time, for you to make a dyno run @ 25psi Fred..... - ZBlacktt 22:19:35 03/06/01 Well, Im going to be very busy for the next 6 weeks - Good2Zya 23:04:06 03/06/01 damn! I'll be in Houston on the 17-18th. Free for a ride?? - NVMYZTTe-1 23:45:42 03/06/01 Isnt that the dates 4 the San Antonio race? - Good2Zya 06:18:46 03/07/01 Man!!! thats alot!!! but you'd be surprising alot of vipers - Matrix-Z's 22:03:43 03/06/01 The only T-28 type that flows 800+ for the pair are mine - MikeH(Phoenix) 23:40:25 03/06/01 Damn man...dyno that thing already :) (n/m) - wesman [92TT-less ] 23:45:20 03/06/01 In about 3 weeks. Doing a group dyno with Mark Tozer (n/m) - MikeH(Phoenix) 23:57:41 03/06/01 Can you videotape it? - mixer 00:20:51 03/07/01 Sweet...looking forward to it...best of luck :) (n/m) - wesman [92TT-less ] 10:52:12 03/07/01
Post a Followup	You cannot reply to this message because you are not logged in.