| this one seems the most logical and easiest. I start out with the SET GAIN at 0. The GAIN is at 5%. I changed the SET value until I got to my desired boost (1.27 bars). I moved the GAIN until I got a pretty steady hold. Then I moved uo the SET GAIN up to about 2 psi less than the target point. Once I did this step it got all wacky. AT that point I would manipulate the GAIN and the SET values slightly up and down in all different combos and I could not get it to hold steady. Right now I'm at like 63% SET I think 11% GAIN and SET BOOST is at like 1.08 Bars. I boost to like 1.25-1.28 BARS and then I immedietly drop off to like 1.04 BARS and hold. Sometimes its .98 BARS....its so FUBARED! Tomorrow I will be running it with only the SET and the GAIN feature. This is where I had a steady response,but wanting to get maximum spooling I tried to use the SET GAIN feature. AS far as I'm concerned the B Spec I and the
Type-S only have the GAIN and SET feature so maybe thats the key. Any tips (although I think I've used them all) is appreciated.
--Z is back upand running! --Who ever said a house is going to be the biggest investment you'll ever make OBVIOUSLY never owned a Z! |
