Subject	that's gonna be tough. might need more than 5mm
Posted by	schuss on January 21, 2005 at 3:31 PM
	This message has been viewed 41 times.
In Reply To	the rims are 18" adr m-sports posted by RedSER13 on January 21, 2005 at 02:59 PM
Message	i had ADR M-Sports in 18's, with offsets: + 35 Front (8.5" Width Rim) / +35 Rear (9.5" Width Rim) and they were shaving my stock calipers the same way. don't forget to account for some flex, cause those rims do flex. i had 5-7mm clearance when sitting, but they shaved the calipers when cornering. [that's why they're not on the car anymore!!]
Follow Ups	offset for skyline brakes - RedSER13 14:03:03 01/21/05 Not sure of the difference in the brakes sticking out sorry, - College Boy 14:04:57 01/21/05 It is hub back spacing that does affect it. I had the same - AzHeat 14:16:31 01/21/05 hub backspacing and offset are two methods to measure the... - maglito 15:10:31 01/21/05 offset of the out rim has no effect on caliper - AzHeat 15:25:39 01/21/05 ??? - maglito 18:56:20 01/21/05 2nd..I'll just stick to what you and I said (n/m) - College Boy 20:00:20 01/21/05 how much to short is it? just get spacers..that really is y - College Boy 14:23:56 01/21/05 Your problem is the shape of the spokes more then the offset (n/m) - YugoBernie (NoVA) 14:14:27 01/21/05 the rims are 18" adr m-sports - RedSER13 14:59:31 01/21/05 different wheels or small hub centric spacers, good luck. (n/m) - maglito 15:11:51 01/21/05 You can test fitment by buying 5 large washers @ Home Depot - YugoBernie (NoVA) 15:13:47 01/21/05 You have to remember that you need a hubcentric ring also - NytWolf 15:15:47 01/21/05 you can measure how much backspacing you will need - AzHeat 15:18:40 01/21/05 that's gonna be tough. might need more than 5mm - schuss 15:31:21 01/21/05 that bad? damn - RedSER13 15:51:55 01/21/05 luke@tirerack can get them. - maglito 18:57:12 01/21/05
Post a Followup	You cannot reply to this message because you are not logged in.