Subject	You can test fitment by buying 5 large washers @ Home Depot
Posted by	YugoBernie (NoVA) on January 21, 2005 at 3:13 PM
	This message has been viewed 31 times.
In Reply To	the rims are 18" adr m-sports posted by RedSER13 on January 21, 2005 at 02:59 PM
Message	and place 1 on each lug and see if thats enough to space the wheel off. If that works measure how thick the washer and that that's the size of spacer that you need. ADR wheels have very shallow spokes. Bernie Bilski berniebilski@comcast.net 1995 NISSAN 300ZX TwinTurbo 5 Speed in Cobalt Green 1989 YUGO GVL 5 Speed in Arctic White ZCCNV #390 ~ ECZA #368 Need INSTALLS, DIAGNOSTICS, SERVICE or PARTS in the NoVA/DC/MD area? Please email me or check out my current inventory.
Follow Ups	offset for skyline brakes - RedSER13 14:03:03 01/21/05 Not sure of the difference in the brakes sticking out sorry, - College Boy 14:04:57 01/21/05 It is hub back spacing that does affect it. I had the same - AzHeat 14:16:31 01/21/05 hub backspacing and offset are two methods to measure the... - maglito 15:10:31 01/21/05 offset of the out rim has no effect on caliper - AzHeat 15:25:39 01/21/05 ??? - maglito 18:56:20 01/21/05 2nd..I'll just stick to what you and I said (n/m) - College Boy 20:00:20 01/21/05 how much to short is it? just get spacers..that really is y - College Boy 14:23:56 01/21/05 Your problem is the shape of the spokes more then the offset (n/m) - YugoBernie (NoVA) 14:14:27 01/21/05 the rims are 18" adr m-sports - RedSER13 14:59:31 01/21/05 different wheels or small hub centric spacers, good luck. (n/m) - maglito 15:11:51 01/21/05 You can test fitment by buying 5 large washers @ Home Depot - YugoBernie (NoVA) 15:13:47 01/21/05 You have to remember that you need a hubcentric ring also - NytWolf 15:15:47 01/21/05 you can measure how much backspacing you will need - AzHeat 15:18:40 01/21/05 that's gonna be tough. might need more than 5mm - schuss 15:31:21 01/21/05 that bad? damn - RedSER13 15:51:55 01/21/05 luke@tirerack can get them. - maglito 18:57:12 01/21/05
Post a Followup	You cannot reply to this message because you are not logged in.