| they slide out inwards, just pop them inwards with your thumbs. If you mean the large plastic interior panels, you have to remove: 1) the rear centre panel in the hatch... two plastic screws and two 10mm nuts... and the rear carpet 2) the two mid hatch panels, two phillips screws (under the removeable panels) and 3 10 mm nuts along the bottom of each panel. 3) the two hatch panels over the rear speakers... (two grilles removed as mentioned) Two phillips screws removed rom the front and rear of the panels, also, one phillips screw and the retaining bracket from under the cargo shade cover holder on each side. Pop the two panels directly behind the seats that cover the ABS actuator and remove the other phillips screw from the speaker hatch panel. Also, a 10mm nut on the cargo rack that helps hold down the speaker panel, and you've reached the stage I was at in the pics. Now you're looking at the stock speaker enclosures... they remove fairly easily with phillips screws. Good Luck!
vorpalZ 1990 TT
 Drifting? Hell I was drifting before it became cool...
|
