Subject	need longer exhaust hangers
Posted by	RedSER13 on December 21, 2004 at 3:11 PM
	This message has been viewed 49 times.
Message	i want to replace my stock rubber exhaust hangers to a longer pieces say about 1". i have a jwt/genie exhaust and tips are almost touching the bottom of my rear bumper. also, for some reason, the right hangs lower than the left. i found out that i cannot just change the hangers at the mufflers because i took those off to see if they will sag, they didn't. if i replace the hangers from the catback all the way to the mufflers, am i putting a strain on something here since the z is not equipped with flex pipes? any suggestions please...
Follow Ups	need longer exhaust hangers - RedSER13 15:11:11 12/21/04 You can use the universal urethane hangers that have - Milo (Sport Z Magazine) 15:18:12 12/21/04 I have the same exhaust set-up, and my driver side tip - Haasz32 15:18:41 12/21/04 you can bend the hangers - UnrulyZX 16:03:45 12/21/04 Yes bend the part of the hanger up on the body. The bracket (n/m) - Spddracer 16:22:57 12/21/04 i can really manage the un-eveness - RedSER13 16:51:20 12/21/04
Post a Followup	You cannot reply to this message because you are not logged in.