Subject	I dont know if this applies to your situation
Posted by	atl300zxtt on November 28, 2004 at 10:47 AM
	This message has been viewed 33 times.
In Reply To	i purchased some grill mesh for my stock airdam, how do posted by DARK KNIGHT on November 28, 2004 at 05:29 AM
Message	on my Stillen front (TT) and my WW front (NA), i drilled tiny screw holes around the openings, and used small screws with large washers to hold it on. This was doable without removing the front fascia, but was a pain in the ass. U also need a 90 degree head for ur drill. My recommendation would be to remvoe the front facia, install the mesh as stated above and reinstall hte front facia.
Follow Ups	i purchased some grill mesh for my stock airdam, how do - DARK KNIGHT 05:29:40 11/28/04 I dont know if this applies to your situation - atl300zxtt 10:47:20 11/28/04 Bend the mesh around the inside edges, epoxy it in place. (n/m) - shawn300zTT GT28R soon 12:04:20 11/28/04 2nd (n/m) - Joker_20_02 15:08:32 11/28/04 I removed mine, molded the mesh and then used rivets. (n/m) - ZonaZ 11:13:18 11/28/04 I removed the fascia, cut the mesh to go over the inside - NAZTTy 12:02:50 11/28/04
Post a Followup	You cannot reply to this message because you are not logged in.