Subject	Just came from the dyno. 525rwhp and 442.1tq
Posted by	NitroPow on November 24, 2004 at 12:22 PM
	This message has been viewed 265 times.
Message	This is my brother's 300ZX. We went to the dyno and we did NO tuning or timing adjustments NO Nitrous and NO chilling the intercooler We just raise the boost with the boost contoller. 1st run 0.68bar. 340rwhp and 346tq 7th run 1.3bar 526rwhp and 442.1tq We wanted to raise the boost more but we couldnt. Maybe wastegates springs needs to be changed to hold more boost. Let me tell you that the car has only this Greddy TD-05 16G Nismo 555cc Tomei 1.2mm gaskets Greddy 2ROW intercooler JWT ECU tuned for 555 and dual intkae Nothing else. Stock engine. I will scan the dyno sheet and post it tomorrow Speed is a passion that can lead to madness.
Follow Ups	Just came from the dyno. 525rwhp and 442.1tq - NitroPow 12:22:05 11/24/04 isn't the tq a little low? Otherwise LOOKS GOOD. (n/m) - spotz 12:24:07 11/24/04 I think it is a little. But like i said we just raise the - NitroPow 12:30:44 11/24/04 It is little not much, he is only running 19 psi. (n/m) - AzHeat 12:47:31 11/24/04 It apparently has dual intake too. Tuning should give you - Scotts94z32 12:47:10 11/24/04 We had an electronic A/F but we couldnt get the readings - NitroPow 12:54:07 11/24/04 Just trying to figure out my nProbe... what does the 90%DC - Scotts94z32 13:42:31 11/24/04 Means his injectors are in the red zone for cycle time. - Dallas DamonZ 14:11:09 11/24/04 You have any other supporting mods, that is dang good - AzHeat 12:48:28 11/24/04 Re: You have any other supporting mods, that is dang good - NitroPow 12:58:46 11/24/04 Re: Just came from the dyno. 525rwhp and 442.1tq - eriksu9 14:28:40 11/24/04 What is the stock head gasket width? - silverZman 14:50:00 11/24/04 awesome numbers - can't wait to dyno myself! (n/m) - tip 15:08:28 11/24/04 I just dynoed mine as well......517RWHP / 534 RWTQ - ScreemZ 17:11:54 11/24/04
Post a Followup	You cannot reply to this message because you are not logged in.