i did it!! posted by my_humble_300zx on August 12, 2004 at 01:01 PM
Message
about a 6 foot piece of 1/2" to 5/8" ID clear plastic flexible tubing and have my son stand on a chair along side of the car. We place a funnel on the end of the tube being held high up in the air. We usually warm the oil containers in hot water and he pours the oil into the tube while I am under the car holding the tube into the side fill hole. There is enough pressure so the oil easily flows down under the car and back up into the fill hole. When it starts to overflow I pinch off the hose and crawl out from under the car. I've used various other methods...all were more messy to work with and took much longer. I've read of a pressurized method which I think would be a good way to go too.
