Subject	Going back to stock suspension?
Posted by	joshsworld21 on August 10, 2004 at 10:59 AM
	This message has been viewed 62 times.
Message	I bought my car and evidently it has been lowerd some. B/c My Wheel and tire set up which should be fine on a stock suspension is rubbing when i turn the tires sharp to the left or right. So what do i need to go back to stock? Is it just the springs that i would need? i doubt the guy that owned it before me bought some elaborate set up.
Follow Ups	Going back to stock suspension? - joshsworld21 10:59:34 08/10/04 First you should find out what you are dealing with - Rob'Z 11:04:16 08/10/04 The main problem is.. - joshsworld21 11:04:27 08/10/04 Are you running stock wheels/tire size? (n/m) - Rob'Z 11:05:42 08/10/04 Should just have to replace the springs - Bluehawk996 11:05:30 08/10/04 BTW what rims are you running? (n/m) - Bluehawk996 11:07:13 08/10/04 toyo 235/40 zr18 95w tires on 18" zenetti wheels (n/m) - joshsworld21 11:23:21 08/10/04 Also the wheel wells have been removed. - joshsworld21 11:33:01 08/10/04 Why don't you stop guessing - and start by doing some - YugoBernie (NoVA) 11:49:36 08/10/04 If it was a problem w/ height it should rub on the top - Bluehawk996 11:49:58 08/10/04 IT could just be very bad offsets on the wheels, or just - boileralum 11:41:25 08/10/04 Car is in the shop now - joshsworld21 13:15:00 08/10/04
Post a Followup	You cannot reply to this message because you are not logged in.