Subject	Re: low.
Posted by	richk on July 22, 2004 at 2:00 PM
	This message has been viewed 50 times.
In Reply To	low. posted by ni[X]it on July 22, 2004 at 12:44 PM
Message	check your cas timing, I believe you are running 12 to 13 degrees of timing. Mine made about those numbers @ 13degrees of timing and a little less boost, although my a/f ratio was much better. Setting the timing correctly helped noticeably, chopping off the screwed CAS connector and putting on a new one helped a lot more and eliminated my occasional pinging problem. rich Z32.org Sport Z Magazine
Follow Ups	My 1st dyno - sumva_z 12:17:58 07/22/04 it was pretty hot that day i guess, don't know what else to - Neo Corleone 12:24:21 07/22/04 84 degrees is hot? The -low- here today is 84deg... (n/m) - J.R. (phx) 12:27:14 07/22/04 bastards... hehe, all i can say is enjoy (n/m) - Neo Corleone 12:57:10 07/22/04 time to do a boost leak check (n/m) - Guapo 12:24:55 07/22/04 I recorded the runs on my - sumva_z 12:31:11 07/22/04 well ... - Guapo 12:36:29 07/22/04 I am NOT trying to start a post war on ASH vs. JWT but - Dave N 12:32:21 07/22/04 No pinging heard, their thoughts based on the ratio (n/m) - sumva_z 12:35:05 07/22/04 what does running too lean mean? (n/m) - titivillus37 12:35:58 07/22/04 Not enough fuel mixture....too lean is bad. You'll learn - Dave N 12:36:59 07/22/04 oh ok, gotcha, thanks (n/m) - titivillus37 12:41:08 07/22/04 to much air in comparison with fuel (n/m) - Madhatter10-6 12:38:47 07/22/04 stoichiometry... - RobWR14 13:09:36 07/22/04 What Ga Tech students do in their spare time :) (n/m) - Madhatter10-6 14:00:04 07/22/04 low. - ni[X]it 12:44:26 07/22/04 thanks, I'll check it out - sumva_z 12:57:00 07/22/04 my only comment is... - ni[X]it 13:37:08 07/22/04 Hell, you don't have to be nice, won't hurt my feelings - sumva_z 15:00:46 07/22/04 Re: low. - richk 14:00:39 07/22/04 Wassup FOo! (n/m) - Zmas 14:10:00 07/22/04 Check your 1) timing, 2) pressurize intake system - Spongerider :) 12:45:12 07/22/04 How have other Z32's done on THAT dyno?? - Scotts94z32 13:55:59 07/22/04 The gear and the humidity isn't helping much. That - AzHeat 14:14:08 07/22/04 Man alive. I missed that. *3rd gear*? - ni[X]it 14:43:24 07/22/04 nah, the dyno corrects-away the gearing for the chart - Technomancer 16:11:57 07/22/04 3rd gear don't count, but you should be seeing those - BigTDogg (MA) 15:04:18 07/22/04
Post a Followup	You cannot reply to this message because you are not logged in.