Subject	low.
Posted by	ni[X]it on July 22, 2004 at 12:44 PM
	This message has been viewed 118 times.
In Reply To	My 1st dyno posted by sumva_z on July 22, 2004 at 12:17 PM
Message	if you are lean, you are not having intake leaks. intake leaks always equal excess fuel (rich). numbers ARE low, even for stock intercoolers, even at 14.8+ psi. (which is crazy imho on stock turbos/daily driver tune.... absolutely crazy). check your cas timing, I believe you are running 12 to 13 degrees of timing. "As the Z32 gets older and decreases in value it becomes affordable by lower income and often less desirable people whose tastes reflect their personality and social standing.- Marshall 17:37:05 10/10/03 Petz #3
Follow Ups	My 1st dyno - sumva_z 12:17:58 07/22/04 it was pretty hot that day i guess, don't know what else to - Neo Corleone 12:24:21 07/22/04 84 degrees is hot? The -low- here today is 84deg... (n/m) - J.R. (phx) 12:27:14 07/22/04 bastards... hehe, all i can say is enjoy (n/m) - Neo Corleone 12:57:10 07/22/04 time to do a boost leak check (n/m) - Guapo 12:24:55 07/22/04 I recorded the runs on my - sumva_z 12:31:11 07/22/04 well ... - Guapo 12:36:29 07/22/04 I am NOT trying to start a post war on ASH vs. JWT but - Dave N 12:32:21 07/22/04 No pinging heard, their thoughts based on the ratio (n/m) - sumva_z 12:35:05 07/22/04 what does running too lean mean? (n/m) - titivillus37 12:35:58 07/22/04 Not enough fuel mixture....too lean is bad. You'll learn - Dave N 12:36:59 07/22/04 oh ok, gotcha, thanks (n/m) - titivillus37 12:41:08 07/22/04 to much air in comparison with fuel (n/m) - Madhatter10-6 12:38:47 07/22/04 stoichiometry... - RobWR14 13:09:36 07/22/04 What Ga Tech students do in their spare time :) (n/m) - Madhatter10-6 14:00:04 07/22/04 low. - ni[X]it 12:44:26 07/22/04 thanks, I'll check it out - sumva_z 12:57:00 07/22/04 my only comment is... - ni[X]it 13:37:08 07/22/04 Hell, you don't have to be nice, won't hurt my feelings - sumva_z 15:00:46 07/22/04 Re: low. - richk 14:00:39 07/22/04 Wassup FOo! (n/m) - Zmas 14:10:00 07/22/04 Check your 1) timing, 2) pressurize intake system - Spongerider :) 12:45:12 07/22/04 How have other Z32's done on THAT dyno?? - Scotts94z32 13:55:59 07/22/04 The gear and the humidity isn't helping much. That - AzHeat 14:14:08 07/22/04 Man alive. I missed that. *3rd gear*? - ni[X]it 14:43:24 07/22/04 nah, the dyno corrects-away the gearing for the chart - Technomancer 16:11:57 07/22/04 3rd gear don't count, but you should be seeing those - BigTDogg (MA) 15:04:18 07/22/04
Post a Followup	You cannot reply to this message because you are not logged in.