| The stock rails on the VG30DETT are substandard. When I saw them durring my plenum pull I was embarrased. My 2000 Civic had an extrudede aluminum machined piece from the factory that put those lines Nissan calls fuel rails to shame. Here are my requests.
1) If you can eliminate the hose running between the rails that'd be great, otherwise use AN fittings between them.
2) 1/2" diameter on the fuell galley's of the rails.
3) Anodized aluminum construction. Maybe you could sell the kit with an external FPR that replaces the stock unit, filter and bracket setup that bolts where the stock filter is. I think this would clean up alot of the fuel line mess in the engine bay. On another note, don't listen to the "copyright" posts on here. First off there are only so many ways to make a fuel rail that'll fit in the VG30DETT engine. Good luck and keep us posted.
========================================================
"I have no experience with this specific pump so don't continue reading expecting to find you answers." - ZLover4Life 07:14 3/16/04
 |
