| **Please do not send pictures my mailbox isnt big enough send a link... you can upload any picture of your z at http://www.streetneeds.com For those of you interested in the boost leak testers that I am mass producing and shipping within the next week. This applys to you! Details about the Boostpro.net boost leak testers are as follows. The Boostpro.net boost leak tester is a tool used to charge the intake system with pressurized air at low pressure to eliminate power robbing vaccum leaks and nasty boost leaks. This is a must for any person planning on modifying their Z. Test it for leaks before you mod it and after to ensure maximum performance. You can test your car for leaks in less than 5 minutes with an air compressor, bike pump/hand pump and 2-3 tools. If you don't have aftermarket intake it may take a little longer because you will need to remove your factory air-box. I say the best time do check for leaks is when your doing an intake upgrade the factory air-box is horrible to take in and out. The tester clamps in as if it were the mass air flow sensor. Available in 2 different models (subject to name change ;P)
Depending on demand prices are almost garaunteed to lower. Included will be a cd with a *.pdf (Adobe Acrobat) and *.doc (Microsoft Word) file with illustrated instructions. I also plan to have a short demonstration video file also. Also a plain text document with non-illustrated instructions. Z - will be approximately $25-30 USD Paypal shipped. Will work for any 90-96 300zx turbo or non-turbo. Has a 2.5 inch gauge mounted for easy viewing of pressure emitted into the system. (No boost gauge required) Has 1 normal valve stem / tire plug fitting to fill by compressor, handheld pump or any type of pressured air. Whats nice about the Z tester is the fact that you can monitor the gauge as you fill the system with pressure to make sure that 5psi of pressure isn't exceeded. X - will be approximately $15-20 USD Paypal shipped. Will work for any 90-96 300zx turbo or non-turbo. Has 1 normal valve stem / tire plug fitting to fill by compressor, handheld pump or any type of pressured air. (Boost gauge required) I like to refer X as the 2 person tool because one must monitor a boost gauge to make sure 5psi of pressure isn't exceeeded. Anyways so now you've read the details on to the part in the subject line. I need all of you who are interested to send me an email to boostpro@hotmail.com with a link to your favorite picture of your z and your tt.net username. On friday I will randomly pick 3 lucky z owners to recieve the Boostpro.net boost leak tester Version Z (a $30 value!) I will then announce the winners on Friday 7/16 and send them there testers the same day. The winners then must test their car for leaks using my product and give the pros and cons on the experience. It will then be featured along with a picture of there Z on the boostpro.net website, Along with a release of the product on Friday 7/23. So with that said start sending me some emails guys! boostpro@hotmail.com some minor disclaimers.
-boostpro.net nor myself are responsible for any damage done to your z. My detailed safe instructions should be followed closely. Follow them and have no problems.
-testers are garaunteed for 1 year from any mechanical defect from the purchase date.
-testers can be purchased in mass quantity for a slight discount (email for details)
-i'm doing this for the Z community and any assistance needed I will do the best of my ability to take care of.
Chris 1995 Stage ? Ultra Red TT
Solidpantz@hotmail.com "I've got this killer up inside of me
I can't talk to my mother, so I talk to my diary." |
