Subject	is there such a product as high-temp dielectric grease? >>
Posted by	stockplayerz (NYC) on May 26, 2004 at 12:03 PM
	This message has been viewed 63 times.
Message	wanna use the grease to prevent injector connector corrosion. the one i have is the CRC Dielectric Grease (technician grade), but not sure if this will withstand the extreme heat of the engine bay. i've tried using it before on the engine coolant temp sensor but the corrosion came back. maybe i didn't put enough on? please advise... mike zxredline@yahoo.com
Follow Ups	is there such a product as high-temp dielectric grease? >> - stockplayerz (NYC) 12:03:41 05/26/04 the di-electrc grease doesn't remove corrosion. You need - boileralum 12:54:01 05/26/04 it is typically designed to sit on top of CPU's that get - spotz 12:55:02 05/26/04 Actually Thermal Paste or Epoxy is for CPUs - Thrillhouse 14:39:30 05/26/04 Dielectric materials are NON-conductive... (n/m) - Steve-O 14:49:23 05/26/04 You are correct sir - Thrillhouse 14:51:47 05/26/04 Metal to metal still makes the connection bridge - Steve-O 14:55:25 05/26/04 The heat shouldn't bother it, its heat range is well above - Moxie 12:56:10 05/26/04 I have also wondered about using somthing like Artic - colocomp (Denver) 12:56:57 05/26/04 You don't want to do that - Marshall 17:42:28 05/26/04 That is what I did. Use very little of it because - Spongerider :) 13:43:43 05/26/04 I filled every connector on my car with di-electric grease - PLEAZURE in CA (SD) 16:13:48 05/26/04
Post a Followup	You cannot reply to this message because you are not logged in.