Subject	I already have a shop that CNC's metal gaskets that
Posted by	AzHeat on March 31, 2004 at 6:23 PM
	This message has been viewed 49 times.
In Reply To	Personally, I'd stick to software if I were you. posted by Tom B (IN) on March 31, 2004 at 06:10 PM
Message	can do the block off plates. They CNC ed my copper down pipe gaskets at a reasonable price few years ago. This would be more for owners who are not running standard plugs or who want to check plugs or compression. The DIYer with mods. One less thing to move out of the way just to remove plugs. I removed my plugs several times during testing and tuning to try out different plugs, check condition, do compression. I hated removing the balance tube, I also had to undo my custom braided fuel line as well. I am doing this for myself. Only if there is enough interests would I make a kit. Not looking to get rich. Nothing complicated about it. The only thing I would be offering that most people won't have easily are the CNCed plates.
Follow Ups	New product concept for the Z32 intake manifold. - AzHeat 17:54:44 03/31/04 Go to work, sounds interesting...maybe it should be a - Nismootc 18:03:29 03/31/04 Personally, I'd stick to software if I were you. - Tom B (IN) 18:10:27 03/31/04 that was the most valuable $.03 in a long time. - BooZted (Soon supercharged) 18:14:22 03/31/04 I already have a shop that CNC's metal gaskets that - AzHeat 18:23:48 03/31/04 it only takes 3 minutes to get the balance tube off (n/m) - BooZted (Soon supercharged) 18:11:51 03/31/04 That's true but if he's trying to market to the average joe - Nismootc 18:21:50 03/31/04 Shimmy around it? You cant shimmy around the balance tube - BooZted (Soon supercharged) 18:24:42 03/31/04 lol - Spee 18:25:36 03/31/04 It can't be done but I've seen it attempted - Nismootc 18:46:19 03/31/04 beat ya to it......slow poke :) (n/m) - BooZted (Soon supercharged) 18:50:31 03/31/04 the balance tube is pretty simple to remove. - Spee 18:22:53 03/31/04 Not for the average Z owner, but for the Z owner - AzHeat 18:27:26 03/31/04 Only reason would probably be the bling factor. - zboost 18:28:07 03/31/04 Could also use fancy colored silicon hose (n/m) - AzHeat 18:40:49 03/31/04 How will you connect the hoze to the IACV valve?? - Borg79(ON) 18:28:12 03/31/04 With hose fitting . Not that difficult (n/m) - AzHeat 18:30:08 03/31/04 if removing the balance tube bothers you so much... - Zeus 19:19:19 03/31/04 Hmmm... (n/m) - michaelkih (Dallas) 19:45:36 03/31/04 which infiniti model is that from? (n/m) - AzHeat 22:13:47 03/31/04 The link says Q45 - Mickie 22:18:27 03/31/04 It's the J30 and you have to have a 94+ plenum to make the - YugoBernie (NoVA) 22:52:27 03/31/04
Post a Followup	You cannot reply to this message because you are not logged in.