Subject	Just figured out my compression ratio with my
Posted by	AzHeat on March 17, 2004 at 12:35 AM
	This message has been viewed 143 times.
Message	head work. Head volume is 49cc + 1.1 mm head gasket + 9 cc piston dish + 89 x 83mm bore/stroke = 7.96:1 I measured my head volume by using piece of plexiglass and siliconing it to my head and filling the combustion chamber with oil through hole in the plexiglass. I used a syringe with ccs on it to measure and fill. Here are the numbers head = 49cc 1.1 mm x 89mm HG = 6.84 89 mm wiseco Piston = 9 total 64.84 cc bore and stroke 89 x83 = 516.567 cc compression ratio = 516.567 / 64.84 = 7.96
Follow Ups	Just figured out my compression ratio with my - AzHeat 00:35:44 03/17/04 Here are the cc flow number before and after on the - AzHeat 00:43:41 03/17/04 Wow...that is going to be one laggy Mofo....... (n/m) - Kyle(Houston) 07:26:54 03/17/04 What is the stock head cc volume? Did I calculate the - AzHeat 12:54:06 03/17/04 lagtastic!!! (n/m) - aliaZ 09:34:07 03/17/04 I guess the question is "how are you going to fix that?" (n/m) - RSR 11:38:23 03/17/04 you can also use rice. it's a non distructive test medium. - ni[X]it 11:49:41 03/17/04 actually, you may have calculated wrong - aliaZ 12:17:58 03/17/04 Really? So my compression ratio isn't that low? (n/m) - AzHeat 12:51:33 03/17/04 You're right. So my compression isn't that low. - AzHeat 13:04:54 03/17/04 you're welcome (n/m) - aliaZ 17:24:52 03/17/04
Post a Followup	You cannot reply to this message because you are not logged in.