Subject	It does sound like you have a blown head gasket.
Posted by	DVDBURN (MD) on February 22, 2004 at 6:29 PM
	This message has been viewed 103 times.
In Reply To	I installed bigger injectors+chip then I blew the headgasket posted by PLEAZURE in CA (SD) on February 22, 2004 at 02:24 PM
Message	You should do a leakdown test. If you have a blown head gasket you will be able to hear where the leak is so you will know which head to pull. I think I speak for most when I say "We don't give 2 sh!ts" (n/m) - YugoBernie (NoVA) 11:40:06 01/15/03 (4)
Follow Ups	I installed bigger injectors+chip then I blew the headgasket - PLEAZURE in CA (SD) 14:24:13 02/22/04 Sorry to hear, Hope you can put it all back together (n/m) - aZiator 14:31:12 02/22/04 Re: I installed bigger injectors+chip then I blew the headgasket - SirpriZ 14:57:05 02/22/04 I think I will go with K Watanabe in Lynwood $2800 installed - PLEAZURE in CA (SD) 15:45:51 02/22/04 Make sure you find your gremlin before you do the>> - SirpriZ 15:54:57 02/22/04 $2800 J-Spec installed .. new timing belt included - PLEAZURE in CA (SD) 16:38:51 02/22/04 i see the problem in the 1st paragraph. (n/m) - Chris(NJ) 15:58:48 02/22/04 Re: i see the problem in the 1st paragraph. - Magnum 16:02:02 02/22/04 Ya it's a little bit too late now - PLEAZURE in CA (SD) 16:26:29 02/22/04 thats wrong...maps are changed when it detects pinging - cant_z_me(back in business) 17:50:50 02/22/04 The program will retard timing when detonation is detected. - AshsZ 22:42:54 02/22/04 You can do a stock rebuild for under $1000, I'm doing it - mpbond 16:20:35 02/22/04 125-130? isn't 128 the lower limit? what about leakdown? (n/m) - Scotts94z32 16:25:35 02/22/04 Before you say it's a blown Headgasket. do another - Yuengling 17:43:07 02/22/04 Thanks .. nice Z you got there (n/m) - PLEAZURE in CA (SD) 17:52:11 02/22/04 Thanks. :) (n/m) - Yuengling 17:58:48 02/22/04 If he has steam coming out the exhaust and losing coolant - AzHeat 18:13:47 02/22/04 sometimes..yes. but that wasn't the case with mine--> - Yuengling 19:13:34 02/22/04 It does sound like you have a blown head gasket. - DVDBURN (MD) 18:29:53 02/22/04 I'm seriously thinking it's a blown headgasket. Does - SpeedyZX 18:49:18 02/22/04 Just so this is clear, AN ASHSPEC PROGRAM SENT TO CALIFORNIA - AshsZ 19:07:11 02/22/04 Cool beans. How do you account for our crappier octane - SpeedyZX 19:20:27 02/22/04 I'm sure their low or mid grade gasoline is the same - AzHeat 19:26:37 02/22/04 It is tuned on 89 octane fuel (which is our mid-grade) - AshsZ 20:13:08 02/22/04 No need to jump to conclusions of what caused it. (n/m) - AzHeat 19:19:32 02/22/04 If you're implying that I think Ash's ECU caused it, then - SpeedyZX 20:15:21 02/22/04 We pay 2.38 per gallon here in Carlsbad =/ (n/m) - james-lee 21:10:05 02/22/04 Your car overheated and you warped the heads, which caused - AshsZ 19:04:40 02/22/04 I agree with you. same thing happened to my Z. (n/m) - Yuengling 19:16:06 02/22/04 I doubt 12 psi of boost will blow a head gasket by itself. (n/m) - AzHeat 19:13:15 02/22/04 Just to make it clear, I drove the car for an entire week - PLEAZURE in CA (SD) 20:06:55 02/22/04 Just curious, what are your plugs gapped to? (n/m) - AshsZ 22:18:08 02/22/04 Stock gap .. around 1.1mm - PLEAZURE in CA (SD) 15:10:30 02/23/04 If you had injectors installed, there is good chance - AshsZ 22:14:06 02/22/04 Re: If you had injectors installed, there is good chance - PLEAZURE in CA (SD) 15:27:02 02/23/04
Post a Followup	You cannot reply to this message because you are not logged in.