Subject	For the record and it has been measured
Posted by	Carlos Ramirez on January 30, 2004 at 6:58 AM
	This message has been viewed 127 times.
In Reply To	Mike Kojima in SPC said that the JWT cam use smaller posted by MikeH(Twin GT35BB Incon Z) on January 29, 2004 at 10:12 PM
Message	Your information is completely and absolutely wrong! The JWT cams except for the #500 has a stock base circle. The milling of the head has nothing to do with the base circle on cam. If the cam has a high lift and the stock base circle then that would be when you would have to mill the head. Mike doe yourself a favor and measure a set of cams or call JWT and ask for the base circle size. The jun cam is the only one I am aware of that you have to mill the head for and thats because of its high lift and possibly stock base circle I don't have a set of them so I can't verify that. But I did have a set of JWT cams and set of Tomei high lifts. Lately you seem to want to argue for just the sake of arguing without any real data. Don't become an AshZ who argues because he felt like he is being attacked whether he is right or wrong. Come back with solid proof not hear say or I heard or someone told me and etc.
Follow Ups	New stand alone EMS for under $500 . - MikeH(Twin GT35BB Incon Z) 18:51:01 01/29/04 Ash in 3....... - PiotrC70 18:53:46 01/29/04 www.z32power.com (n/m) - BooZted (soon supercharged) 18:55:16 01/29/04 thanks, that's what it was... haven't heard any progress on - PiotrC70 18:57:46 01/29/04 joel. who knows. (n/m) - Halo Z 18:55:41 01/29/04 nothing can beat the zem, :SIGH: (n/m) - Halo Z 18:54:59 01/29/04 Did he give a name was it the LX12? - Carlos Ramirez 19:00:43 01/29/04 No you are thinking of microtech, that is about $1000 and - MikeH(Twin GT35BB Incon Z) 19:02:48 01/29/04 VTC? When you go aftermarket cams, VTC goes away (n/m) - MikeH(Twin GT35BB Incon Z) 19:12:27 01/29/04 dude. just shut up. (n/m) - Halo Z 19:31:23 01/29/04 Very nicely put, 2nd. (n/m) - Waco300zx 19:32:44 01/29/04 That goes for you too WACO (n/m) - MikeH(Twin GT35BB Incon Z) 20:32:45 01/29/04 Dude, you aren't a nOOb, you dont have to MASS POST - Waco300zx 15:16:03 01/30/04 hehe, you can tell from his old posts, he's not up to speed - Halo Z 15:22:36 01/30/04 What is your problem Mr. Halo? - MikeH(Twin GT35BB Incon Z) 20:40:43 01/29/04 I think many of the veterans have read through enough - ni[X]it 20:52:45 01/29/04 yep (n/m) - Spee 21:08:27 01/29/04 figures from you . (n/m) - MikeH(Twin GT35BB Incon Z) 21:19:07 01/29/04 what figures? (n/m) - Spee 21:24:15 01/29/04 3rd (n/m) - Snoguitar 21:32:39 01/29/04 Another NAer (n/m) - MikeH(Twin GT35BB Incon Z) 21:35:34 01/29/04 Your point? (n/m) - Snoguitar 21:37:44 01/29/04 what the hell does that have to do with anything? - Chris-TTZ 21:45:59 01/29/04 His car isn't faster. It's broke. (n/m) - ni[X]it 21:51:01 01/29/04 That's right. But it is a WIP right now. (n/m) - MikeH(Twin GT35BB Incon Z) 21:53:04 01/29/04 Okay, my S-10 pickup with the 4.3 V6 is faster - MikeH(Twin GT35BB Incon Z) 22:01:52 01/29/04 3 litre 3500lb car, versus a 4.3 litre 3200lb truck. (n/m) - ni[X]it 22:15:28 01/29/04 How about 190HP vs 222HP and the z has less air drag - MikeH(Twin GT35BB Incon Z) 22:18:54 01/29/04 the truck has much more torque than the NA Z (n/m) - Spee 22:21:01 01/29/04 that's true, but my torque is non existant above - MikeH(Twin GT35BB Incon Z) 22:28:05 01/29/04 Call Jesse Jackson then or Al Sharpton (n/m) - MikeH(Twin GT35BB Incon Z) 21:59:01 01/29/04 i don't think anyone is worried about your opinion, - Chris-TTZ 22:04:17 01/29/04 You are mixing car talk with race and nationality on here - MikeH(Twin GT35BB Incon Z) 22:13:28 01/29/04 JWT retains VTC. (n/m) - Chip(GMS Racing) 21:05:50 01/29/04 Mike I didn't really want to respond to your post - Carlos Ramirez 21:13:34 01/29/04 Actually Carlos the JUN have bigger base circle - MikeH(Twin GT35BB Incon Z) 21:25:37 01/29/04 please rethink what you just said.. - Carlos Ramirez 21:39:43 01/29/04 That right, we have hydraulic lifters that take up - MikeH(Twin GT35BB Incon Z) 21:47:09 01/29/04 Here is your own post on the very subject. - MikeH(Twin GT35BB Incon Z) 21:57:30 01/29/04 Dude you are talking yourself into a circle.. - Carlos Ramirez 22:06:47 01/29/04 Mike Kojima in SPC said that the JWT cam use smaller - MikeH(Twin GT35BB Incon Z) 22:12:23 01/29/04 For the record and it has been measured - Carlos Ramirez 06:58:09 01/30/04 What is the lift on the 400 cams? My lift is 9.5mm (n/m) - MikeH(Twin GT35BB Incon Z) 07:41:35 01/30/04 When I get my cams back with my heads I'll measure - MikeH(Twin GT35BB Incon Z) 07:45:21 01/30/04 9.38mm and 268 degrees - Carlos Ramirez 08:11:00 01/30/04 Since when can you *not* use VTC on a JUN cam??????????????? (n/m) - Kyle(Houston) 10:43:00 01/30/04 I didn't say Jun gives up VTC? Mike did.. (n/m) - Carlos Ramirez 07:43:53 01/31/04 Then what did you say here----> - Kyle(Houston) 18:06:48 01/31/04 Sorry I misunderstood - Carlos Ramirez 07:24:06 02/01/04 Ahhhh no wonder you are full of misinformation then----> - Kyle(Houston) 10:34:48 02/01/04 understood. - Carlos Ramirez 13:24:49 02/01/04 :-x.............. (n/m) - Kyle(Houston) 07:49:39 02/02/04 It starts with Un??? something and made it USA (n/m) - MikeH(Twin GT35BB Incon Z) 19:14:17 01/29/04 utech maybe? (n/m) - joel(PA) 19:22:18 01/29/04 Univer something.. I will find out the exact name - MikeH(Twin GT35BB Incon Z) 20:44:02 01/29/04 ? - Spongerider :) 19:05:01 01/29/04 Re: ? - Chris-TTZ 19:40:17 01/29/04 That's exactly what I said. On the pressure side. (n/m) - MikeH(Twin GT35BB Incon Z) 20:34:23 01/29/04 ...'sigh'. - Chris-TTZ 21:57:46 01/29/04 I've never seen one installed so I can't comment - MikeH(Twin GT35BB Incon Z) 22:03:59 01/29/04 Thanks! This is the first time I heard of suck and push - Spongerider :) 11:07:37 01/30/04 Here is a link to a blow through MAS - MikeH(Twin GT35BB Incon Z) 21:00:14 01/29/04 I think this MAS can compliment the ZEM with - MikeH(Twin GT35BB Incon Z) 21:30:19 01/29/04
Post a Followup	You cannot reply to this message because you are not logged in.