| WITH regapping AND applying anti-sieze on them, in under 15 minutes. Tools: 3/8 drive ratchet 6" extension 10mm socket 12mm socket 12" extension Plug socket 10mm socket to remove IAA metal pipe holding screw on driver's side plenum. 12mm to remove balance tube bolts and coil pack bolts disconnect coil pack harnesses & pull coil packs out 12" extension with plug socket and they're out; 5-7 minutes. gapping the plugs and applying anti-sieze takes a few minutes to do, I'd say about 5 there, but it could be done in 3. Installation and reassembly; 5-7 minutes. It could take 20 minutes to do the whole thing. I've pulled engine/tranny using a floorjack and jackstands in 2 hours, flat. Installation is another ball of wax I'd never race a clock to do though. :)

[ ashleypowers.com ] [ agpowers@bellsouth.net ] [ Zemulator Information Sheet ] [ Z1 Motorsports Website ]
.JPG) Enthusiasts soon understand each other. --W. Irving. Are you an enthusiast?
|