Subject	You may want to put extra shims>>
Posted by	Rayner on October 23, 2003 at 12:02 PM
	This message has been viewed 30 times.
In Reply To	Results from 300Degree Camber Kit Install >> posted by stockplayerz (NYC) on October 23, 2003 at 11:46 AM
Message	In addition to the ones coming with the kit, I mean. Home Depot sells aluminum beams (almost exactly the required width) you can cut to length and drill, using the kit shims as a pattern. The screws coming with the kit have some spare length you can use. Take the camber wherever you want by just adding shims.
Follow Ups	Results from 300Degree Camber Kit Install >> - stockplayerz (NYC) 11:46:51 10/23/03 I have a lock removal kit from when I had the same problem - dilly yo 12:01:27 10/23/03 thanks for the offer bro! i'll let you know. thanks. (n/m) - stockplayerz (NYC) 12:28:19 10/23/03 You may want to put extra shims>> - Rayner 12:02:25 10/23/03 what are the sizes of the bolts w/ the camber kit? (n/m) - TagZ 12:06:31 10/23/03 You are using the 300degree camber kit in the rear? - ZSteveZ 12:15:54 10/23/03 no, the kit is only for the front. rears were adjusted by > - stockplayerz (NYC) 12:26:37 10/23/03 Ok, makes sense. I've adjusted all the way out and the best - ZSteveZ 12:36:08 10/23/03 You missed the end of the night... - Sportzcoop 15:03:35 10/23/03
Post a Followup	You cannot reply to this message because you are not logged in.