on good except for the top elbow. The bottom elbow worked out great with the sharp 90' it makes and the upper radiator pipe worked nicely too. Had to shorten the upper pipe due to the koyo being thicker but it worked out nicely. The problem with the top elbow is it too short thus it was causing the hardpipe to rest against the p/s pulley. No way to maneuver the pipe. If one leg of the upper elbow was about ~2" longer it would have moved the pipe away from the pulley. I noticed the oem rubber hose has a jog in it before it makes the curve downward. So I just used that small section from the oem hose and all is fine. Other than that they look good and I'll take some pics tomorrow and post them. Thanks