| about that and they had a number of different solutions Suggestion #1- You can take the stock ones and remove the rubber lining inside then dremel them out a bit to get the inside slope a little longer and deeper. Then take a water hose, or any other piece to use as a lining and cut in down the middle and set inside the newly lengthened piece. Suggestion #2- Take a 2.5 in wide piece of sheet metal (I would suggest probably an 8 gauge or 10 gauge.. if you have arms like a girl) and bend it starting from the back of the radiator where you can mount it and bend over the radiator and toward the front mounting point on the body. Cut to the according mounting point. Repeat for other side. From here you can clean it up by bending it in a vice or something. Your fabbing something so I won't be pretty at first. Take time cleaning it up, maybe even polishing then if you get the chance.
 |
