| Message |
 As you can see, at 3000 and 3500 power is nearly the same (within 5-10 horsepower of one another). PE1420 power at 4000 is about 30 hp less than the 500s, but just about catches back up again at 4500. Keep in mind that both of these are on stock manifolds, and similar boost (not sure how much boost Seb was doing on that run). Also, setups are similar but not exact, to my knowledge. Runs were made on the same dyno, which should keep things consistent. I have plenty of 2530 dynos I'd like to compare, but they are all over the place because of different dynos, different setups, etc. Notice how much lag is elimated with the addition of the Specialty-Z inconel manifolds (Run006 on the second chart). Lag gets to stock-like and even better than stock levels. So I'm assuming that with these manifolds on the PE's, lag will come a lot closer to, if not better than, stock with awesome top end.
 |
 |
