TwinTurbo.NET: Nissan 300ZX forum - Snow Performance Water Injection - Base Kit Specials
People Seeking Info
 
   


     
Subject SELLING: Snow Performance Water Injection - Base Kit Specials
     
Posted by The Devils Z on May 08, 2008 at 10:07 PM
  This message has been viewed 115 times.
     
     
 
Screen Name: The Devils Z
Real Name: Dee Anthony Ridgeway
Phone: 302.562.5634
Location: Bear, De 19701 USA
E-mail: info@TheDevilsZ.com
 
     
Message All -
on the average stock Z, approx 3 more PSI on pump gas which is about 30rwhp can be had with Water Injection. As you can see by reviewing the A/F ratio graphs, with the usage of a methanol mix 25% or more, one can actually produce more rwhp safer !!!

red line = 1.4 bar pump gas ~ 94 octane ( no detonation )
blue line = 1.65 bar pump gas w/ WI ~ 94 octane ( no detonation )

If you live in very hot climates or have lower than 93 octane at the pump, IMHO - WI is a "no brainer" for extra buffer ( same boost levels ) or more / higher PSI at the same or safer A/F ratio levels

Z32 Stage 1 Base Kit :

Includes :

• 150+ PSI High Volume Pump
• 3 Quart Reservoir
• 2 Nozzles To Cover a Wide Range of Horsepower
• Required Hardware Needed For Installation
• Comprehensive Instructions
• Dual Nozzle upgrade

$280 shipped !

Z32 Stage 2 Base Kit II ( for custom dyno tuning ) :

Includes:

• 150+ PSI High Volume Pump
• 3 Quart Reservoir
• 2 Nozzles To Cover a Wide Range of Horsepower
• All Required Hardware Needed For Installation
• Comprehensive Instructions
• Dual Nozzle upgrade
********
• Digital Variable Controller ( allows flow injection to gradually increase linearly as the boost increases )
********
$415 shipped


additional accessories depending on mounting location and safety preferences ( can be added on later if desired ):

Safe injection

**** temp on back order - inquire for availability ****
ball park price ~ $140 / TBD

220 psi pump upgrade ** recommended for rear mounting and 600rwhp + applications **

$39.95 ( when upgrading from 150psi pump )

Solenoid upgrade

Shut off solenoid is used when mounting the injection nozzle lower than the reservoir or the reservoir is rear-mounted to prevent gravity flowing. It is also used to prevent siphoning when the injection nozzle is mounted after the throttle body or carburetor and is exposed to vacuum.

$49.95

Low Level Indicator ( unmounted )

$39.95

Boost Juice * recommended for hot climate areas *

Boost Juice™ is Snow Performance’s proprietary mix of 49% methanol and 51% water. It is made in a controlled environment with special care to make sure the ratios are accurate to result in a high performance water-methanol fluid formulated for use in the Boost Cooler™ injection system.

$29.95 for 4 gallon case


email = paypal and accept all major credit card


*** please detail turbo size for accurate nozzle size recommendation ****

Snow Performance Sales Pitch :

" 1) Engineering - each system has been designed and tested by engineers to ensure reliability and robustness. The Boost Cooler will do what it is designed to do for a very long time

2) Digital Variable Controllers for different applications - Not just boost actuated, we have specially designed controllers for each vehicle / application to ensure maximum power

3) High Pressure/ High Volume Pumps - Our pumps are specially designed for Snow Performance to deliver higher pressures and reliability. Each pump is pre-tested and designed to work with methanol.

4) Unsurpassed Atomization - Along with higher pressures, our nozzles are specially designed to spin the fluid supersonically before being forced through a venturi shaped oriface for the ultimate in atomization.

5) Trained technical and tuning advice - trained, knowledgeable technicians are always available to help.

6) Warranty - Life time warranty available. Snow backs it's systems with industry leading warranties.

7) Customer Service - Expert technical advice is available anytime during business hours. We have the experience to answer installation and tuning questions.

8) Safety - Our new safe injection is the ultimate in safety for even the most aggressively tuned applications. This ensures worry-free power in even the most demanding racing applications as well as full power on the street.

With the proper tuning, expect about 10-20% improvement in power. Can be used in Nitros applications. Can be used in MAP and MAF applications.

The Safe Injection Module can be used to trigger a warning lamp, bleed off boost pressure ( electronic boost controller or manual boost controller),or switch EMS maps."

     
Follow Ups
  • Snow Performance Water Injection - Base Kit Specials - The Devils Z 22:07:43 05/08/08